CBMZS - 486 STD FLOOR EPOXY PART B

  • MSDS: CBMZS
  • Manufacturer: GIBSON HOMANS CO
  • Product Name: 486 STD FLOOR EPOXY PART B
  • National Stock Number: 5610-00N071042
Product Identification

Product ID:486 STD FLOOR EPOXY PART B
MSDS Date:04/26/1995
FSC:5610
NIIN:00N071042
MSDS Number: CBMZS

Responsible Party
GIBSON-HOMANS CO
1101 HANZLIK AVE
BALTIMORE, MD 21237
US

Emergency Phone: 410-391-4500; 216-843-2982

Info Phone: 410-391-4500; 216-843-2982

Cage: GIBHO

Contractor
GIBSON-HOMANS CO
UNKNOW TWINSBURG, OH 44087 US

Telephone: 216-425-3255

Cage: GIBHO

Ingredients

POLYAMIDE; (POLYMER FATTY ACIDS WITH ADDITIVES) LD50

CAS: 68082-29-1

Fraction By Weight: 35-45%

OSHA PEL N/K

ACGIH TLV: N/K


(ORAL, RAT) 5840 MG/KG

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5-10%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 500 STEL

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF HIGH VAPOR
CONCENTRATIONS MAY HAVE RESULTS RANGING FROM DIZZINESS AND HEADACHE
TO UNCONSCIOUSNESS, AS WELL AS IRRITATION OF THE RESPIRATORY TRACT.
ROUTES OF ENTRY ARE INHALATION A ND SKIN. VAPOR MAY IRRITATE EYES,
NOSE AND THROAT. CHRONIC: PROLONGED OR REPEATED SKIN CONTACT MAY BE
IRRITATING.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. TAKE TO MD
FOR DEFINITIVE MEDICAL TREATMENT. SKIN: WASH AFFECTED AREA WITH
SOAP AND WATER. INHALATION: IF OVERCOME BY VAPORS, REMOVE FROM
EXPOSURE, REST ORE BREATHING. KEEP INDIVIDUAL CALM ANDCALL MD.
INGESTION: TREAT SYMPTOMATICALLY AND CONTACT MD.

Fire Fighting

Flash Point Method:SCC
Flash Point:106F,41C
Lower Limits:2%
Upper Limits:12%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFTIVE. WATER MAY BE USED TO COOL CLSD CNTNRS
TO PVNT PRESS BUILD UP & POSS (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS CLSD EXCEPT WHEN IN USE. CLSD
CNTNRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. DO NOT USE IN
VICIN OF OPEN FLAME OR SPARKS. EXTINGUISH ALL (SUPDAT)

Accidental Release

Spill Release Procedures:SCRAPE INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. VAPORS MAY
IGNITE EXPLOSIVELY. PREVENT BUILD UP OF VAPORS. KEEP AWAY FROM
HEAT, SPARKS AND OPEN FLAME.
Other Precautions:AVOID PROLONGED BREATHING OF VAPORS AND REPEATED
CONTACT WITH SKIN. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NONE REQUIRED WITH ADEQUATE VENTILATION. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:USE GENERAL/LOCAL EXHAUST TO PREVENT BUILD UP OF VAPORS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:GOOD GENERAL CLEANLINESS AND HYGIENE.
Supplemental Safety and Health
FIRE FIGHT PROC: AUTO-IGNIT OR EXPLO WHEN EXPOS TO EXTREME HEAT. FOG
NOZZS ARE PREF IF WATER IS USED. EXPLO HAZ: PILOT LIGHTS & ALL
SOURCES OF IGNIT.

Chemical Properties

Boiling Pt:B.P. Text:180F,82C
Vapor Pres:33 @ 68F
Vapor Density:>1
Spec Gravity:1.48
Evaporation Rate & Reference:>1 (BUAC=1)
Solubility in Water:NONE
Appearance and Odor:OPAQUE, LIGHT AMBER, MEDIUM SYRUP WITH AMINE ODOR.
Percent Volatiles by Volume:20

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:HEAT AND OPEN FLAME.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
CARBON DIOXIDE AND CARBON MONOXIDE AS WELL AS ORGANIC COMPOUNDS OF
UNKNOWN STRUCTURE.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.